Best 2024 Honda Accord Wheel Spacers Flush Fitment PCD CB Offset Guide

Learning about the best 2024 Honda Accord wheel spacer size is helpful in getting proper wheel fitment. Adding wheel spacers is one of the easiest and quickest ways to level up the wheel styles and handling. The OEM Honda Accord wheels and tires are slightly tucked under the fender. After installing wheel spacers, the arches are completely filled up. This makes your car look nicer.

Every Honda Accord wheel spacer has a bolt pattern, center bore, thickness, and thread pitch, expressed typically like this: 5×114.3mm (PCD), 64.1mm (CB), 15mm (thickness), M12x1.5mm (thread pitch). For a flush stance, front 15mm and rear 20mm spacers are optimal because the wheel arches of a 2024 Honda Accord are a bit large. Front 20mm and rear 25mm spacers provide a more aggressive wheel style.

Can 2024 Honda Accord 5×114.3 Fit 5×112 Wheels?

Yes, with 5×114.3 to 5×112 wheel adapters, you can run 5×112 wheels on a 2024 Honda Accord. Installing wheel hub adapters or conversion spacers to vehicles is an increasingly common practice. The 5×114.3 to 5×112 wheel adapters are used for 5×114.3mm bolt pattern cars to fit 5x112mm bolt pattern wheels. As long as you fit them properly, the 2024 Honda Accord wheel adapters are perfectly safe to use.

Is It Safe to Double Stack 2024 Honda Accord Wheel Spacers?

It is NOT safe to double stack 2024 Honda Accord wheel spacers. Because putting a wheel spacer on another spacer will negatively affect the stability of the spacers. If you need 2-inch wheel spacers, then just buy one-piece 2-inch spacers. Never stack two 1-inch spacers to make up a 2-inch spacer. Think again if the saved money really worth it. Proper equipment will always be the best.

A key advantage of BONOSS forged active cooling 2024 Honda Accord wheel spacers is the active cooling feature. These BONOSS forged active cooling spacers come with petal-shaped grooves. The grooves allow the external cold air to flow continuously inside the spacer when it rotates. The air takes away the heat, actively dissipating heat for the braking system. This enhances the heat dissipating efficiency and improves road safety.

Should I Use Loctite on 2024 Honda Accord Wheel Spacers?

As long as you tighten wheel lug nuts properly and check them occasionally, you don’t need to use Loctite on 2024 Honda Accord wheel spacers. Generally, Loctite is only used for threaded fasteners that may never be removed. For installation, tighten each spacer lug nut using a crisscross sequence (in a “star” pattern), usually to 80 Ft-lbs of torque each. Re-tighten each lug nut after about 100 miles of driving.

One of the key benefits of aluminum alloy wheel spacers is their corrosion resistance. BONOSS forged aluminum alloy 2024 Honda Accord wheel spacers are strong and light, with a greater range of options from track days to daily driving. They look good and will work well. People choose forged 6061-T6 aluminum spacers for cost effectiveness. And track folks all run 7075-T6 aluminum wheel spacers for ultimate performance.

What is the Lug Nut Size on a 2024 Honda Accord?

The most common size of a Honda lug nut is metric 12×1.5mm thread pitch, 3/4″ hex, radius seat. A M12 means the width of the thread area and a 1.5mm means the thread pitch. The stock wheel nuts can fit the stock wheels perfectly. However, aftermarket wheels come with different wheel lug seat types. When changing to new aftermarket wheels, the old lug nuts may not fit the new wheels.

In this case, BONOSS forged 50BV30 2024 Honda Accord lug nuts are the best option. These BONOSS ISO Grade 12 lug nuts have a proof load of 105,700N. High-strength lug nuts are necessary to secure the wheels and tires in place properly. By far, BONOSS forged 50BV30 Honda Accord lug nuts give neutral salt spray resistances exceeding 500 hours. You don’t need to worry about corrosion issues.